608

Elimination of the error "Windows could not detect this network’s proxy settings"

"Windows could not detect this network’s proxy settings" such a message is received by many users after the network diagnostics procedure, which I recommend performing in the absence of access to the Internet.

Why there is no Internet and network diagnostics does not help

There can be many reasons for the lack of access to the Internet. Performance is influenced by both physical and program factors of influence. The most common are the following:

  • Poor network cable used for connection or poor Wi-Fi coverage.
  • Failed router settings.
  • The latest updates conflict with the installed software and system configurations.
  • Free, low-quality proxy server.

1.jpg

Actions to eliminate the error

Common sense sends us to the primary physical check of the network equipment, as they say, we try to touch the cable, reconnect to the ports, we look at the reliability of fixation. Then we overload everything (personal computer, router).

The above actions very often help, if the desired result is not obtained, it's time to look at the operating system settings, perhaps a failure or automatic change of any network parameters has occurred.

There are two simple but effective steps to start with, resetting proxy settings and resetting network settings. Windows often do not save settings.

We bring to your attention a solution to the problem in the family of Microsoft Windows operating systems versions 7, 8, 10.

Windows 10

Resetting Win10 network parameters is quite simple, the procedure takes a few clicks and less than one minute.

  1. Through the "Start" menu, go to "Settings".

    2.jpg

    3.jpg

  2. We are looking for the "Network and Internet" section, which is responsible for configuring all network settings of the system.
  3. In the list of subcategories, select the "Status" subsection, in the window of which you need to click on the "Network Reset" button.

    4.jpg

  4. Confirm the reset by clicking on the button and check the result.

    5.jpg

The procedure for resetting proxy settings is almost identical. In the section "Network and Internet" we need a subsection "Proxy server" or simply "Proxy". In this section, we need to turn off all automatic and manual proxy settings.

In Windows 7, 8

In earlier versions of Microsoft Windows (7, 8), to reset the line parameters, use the cmd command line application launched as Administrator.

  1. In the standard search line of the operating system, we drive the cmd request. In the results window, using the context menu called by pressing the right key on the application, the cases are launched on behalf of the Administrator.

    6.jpg

  2. We need to execute two consecutive commands one by one through the command line. The first, which is responsible for returning the default settings to the wsock32.dll file, is better known as resetting Winsock. To do this, we type the netsh winsock reset command and start its execution. The second, resets the TCP / IP settings and saves the results to a text file, this is netsh int ip reset c:\netshlog.txt

    7.jpg

  3. An important stage is the reboot of the operating system, the changes will take effect only after it is completed.

Out of the box, but it helps

If the error was caused by an automatic update, then you can solve the problem in the following simple way. You need to roll back the changes.

  1. Open all the same "Settings" through the "Start" menu

    8.jpg

  2. We are looking for the section "Updates and Security" in which, in turn, the subsection "Recovery"

    9.jpg

  3. In the "Recovery" window, click on the "Get started" button and follow the tips of the recovery wizard. At the end, we reboot the system and check the functionality.

    11.jpg

Failures during updates are a very common reason for the failure of network parameters, so we recommend doing them in manual mode, having familiarized yourself well with the changes that will be made to the operation of your operating system.